09-27-2005 06:29 AM - edited 03-13-2019 10:39 AM
The phone goes back to dial tone after about 2 seconds in the middle of
referencing a phone number to dial. Example, 724 (after a few seconds it goes to dialtone). Is there a service parameter to adjust this time.
I know there is the Off-hook to first digit parameter, but is there a parameter for any digit that follows the first? Thanks.
Solved! Go to Solution.
09-27-2005 06:53 AM
Hello,
Is this an internal number or external number.If it is external number then that means calmanager is finding a match after 724 and it is giving a dialtone.
If you are looking for interdigit timeout it is T302.But I don't think that is the problem
Thanks,
Radhika
09-27-2005 06:53 AM
Hello,
Is this an internal number or external number.If it is external number then that means calmanager is finding a match after 724 and it is giving a dialtone.
If you are looking for interdigit timeout it is T302.But I don't think that is the problem
Thanks,
Radhika
09-27-2005 07:38 AM
It is an external number.
09-27-2005 06:53 AM
It's the T302 timer. Please see the document below.
http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_tech_note09186a00800dab26.shtml
Hope this helps.
Brandon
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide