- Super Silver, 17500 points or more
- Hall of Fame,
Cisco Designated VIP,
2017 IP Telephony, Contact Center, Unified Communications
In my environemt users are dialing *[site code]DN in order to reach users in other remote site. While in SRTS mode I trying to allow them to keep that functionallity by translating the number into full e.164 number. It seems that voicetranslation rules cannot accept the * as a dialed digit, neither does the num-exp. Is there a way to accomplish the translation in SRST?
Try this config. I haven't had a chance to lab it, but it seems to me you want to apply this to all incoming legs in SRST.
Let me know if this works out for you.
voice translation-profile blah
translate called 111
voice translation-rule 111
rule 1 /\(\*091\)\(....\)/ /91905337\2/
tranlation-profile incoming blah
router#test voice translation-rule 111 *0915000
Matched with rule 1
Original number: *0915000 Translated number: 919053375000
Original number type: none Translated number type: none
Original number plan: none Translated number plan: none