×

Warning message

  • Cisco Support Forums is in Read Only mode while the site is being migrated.
  • Cisco Support Forums is in Read Only mode while the site is being migrated.

Marking down VC from AF41 on the LAN to AF31 for the WAN

Unanswered Question
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
spremkumar Fri, 09/30/2005 - 21:09
User Badges:
  • Red, 2250 points or more

hi


if your switch is already marking this VC calls as COS 4 and sending it to your router then you can define a class map matching all the cos4 marked traffic and set cos 3 under the policy map while remarking.

Place the service policy on the outgoing interface facing your SP side...

just try this out and revert back how it goes...


regds


spremkumar Sun, 10/02/2005 - 19:52
User Badges:
  • Red, 2250 points or more

Hi


do find some sample config lines which can help u out..


!

class-map match-any test

match cos 4

!

policy-map test

class test

set dscp af31

!


Apply this policy map under your wan interface connected to the remote site.

apply it in the outbound direction...


!

interface serial 1/0

service-policy output test

!


hope this helps ...


regds


Actions

This Discussion