×

Warning message

  • Cisco Support Forums is in Read Only mode while the site is being migrated.
  • Cisco Support Forums is in Read Only mode while the site is being migrated.

WLSE 2.12 - TKIP Replay is detected (cnt: 1)

Unanswered Question

Since upgrading my APs to 12.3(7)JA, I am now seeing this error message often in the WLSE 2.12: TKIP Replay is detected (cnt: 1). The troubleshooting guide says "The fault threshold set has been exceeded.


When this fault is cleared, the following message displays: There is no TKIP Replay detected"


I still don't understand what this error is telling me... can someone elaborate?

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.

The Faults doc says that the "TKIP Replay is detected" message means:


"The fault threshold set has been exceeded.


When this fault is cleared, the following message displays: There is no TKIP Replay detected. "


But I still don't understand - what fault threshold is it talking about? What triggers this fault to occur?

Actions

This Discussion

 

 

Trending Topics - Security & Network