10-04-2005 02:31 PM - edited 07-04-2021 11:11 AM
I have a WLSE Express that am am using as a radius server for my Spectralink IP phones. I also have WDS and FSR setup and running. The problem is that the WLSE will not authenticate the phones. The radius server log shows the phone coming in and getting challenged, but it never accepts it. It looks like the radius server is trying to use Cisco-PEAP, when it should be using LEAP. Any ideas?
10-09-2005 06:30 PM
When you say it should use LEAP is this what you have configured on the phone? The WLSE Express can configure and use more than one of the authentication services at the same time. If more than one service is configured, the WLSE negotiates which one to use. Where are you seeing it is using Cisco-PEAP instead of LEAP? Can you attach these?
10-10-2005 06:39 AM
10-10-2005 10:02 AM
Cisco ACS will give priority to LEAP, but not sure aboute WLSE express. I would turn off any EAP types you are not using (PEAP, EAP-TLS, EAP-FAST). Maybe Spectralink doesn't support NAK feature.
10-10-2005 11:58 AM
That's another question. I don't know if it's possible to turn off the other EAP types.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide