? Aironet 1231 - Can not get multiple SSIDs and trunked Vlans to work.

arek_papelian · ‎10-04-2005

Im connecting a 1231 off of a 3750 via a dot1q trunked port. I can connect to and communicate with the AP over copper, and when I configure 1 SSID with 1 vlan it works perfectly. When I add an SSID and a VLAN, neither SSIDs function. Any help would be greatly appreciated. Thank you

smahbub · ‎10-10-2005

I think that there is some configuration error. When you create multiple SSIDs you have to point each SSID to a single VLAN. For more information on this have a look at the following document which explains the configuration of Multiple SSIDs on the APs.

http://www.cisco.com/en/US/products/ps5861/products_configuration_guide_chapter09186a00804ed723.html

ggiusti · ‎12-20-2005

Hi Arek, I have the same problem,do you resolved it ?