WS-SUP720-BASE memory upgrade

Unanswered Question
Oct 5th, 2005

Hi,

We have WS-SUP720-BASE, both the RP & SP memory is 512MB. We want to upgrade it to both 1GB. Can you tell me which part number and how many QTY we must be order for both RP & SP memory upgrade?

Best Regards,

Jackson Ku

I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Average Rating: 0 (0 ratings)
jackson.ku Wed, 10/05/2005 - 17:13

Hi,

So for one WS-SUP720-BASE, we need 2 MEM-MSFC3-1GB, one for RP and one for SP, is it correct?

Best Regards,

Jackson Ku

thisisshanky Wed, 10/05/2005 - 19:50

The description of the line item,MEM-MSFC3-1GB says

"1GB Mem for Sup720, Sup720-3B and MSFC2A"

So that should take care of the SP (sup engine) but doesnt look like MSFC3 is supported.

At the same time, MEM-MSFC2-512MB=, the description shows, MSFC3.

"Catalyst 6500 512MB DRAM on the MSFC2 or SUP720 MSFC3, Spare"

amit-singh Thu, 10/06/2005 - 04:03

Jackson,

Yes, You need 2 MEM-MSFC3-1GB in order to upgrade both the SP and RP to 1 GB each. I used the 2 of them when I upgraded my Sup 720 as there are 2 DRAM dimm slots on SUP 720 and it requires MEM-MSFC3-1GB in each DIMM in order to upgrade the RP and SP both to 1 GB.

HTH,

-amit singh

Actions

Login or Register to take actions

This Discussion

Posted October 5, 2005 at 4:42 PM
Stats:
Replies:5 Avg. Rating:
Views:1071 Votes:0
Shares:0
Tags: No tags.
 

Discussions Leaderboard

Rank Username Points
1 2,069
2 1,746
3 1,704
4 1,629
5 1,583