WS-SUP720-BASE memory upgrade

jackson.ku · ‎10-05-2005

Hi,

We have WS-SUP720-BASE, both the RP & SP memory is 512MB. We want to upgrade it to both 1GB. Can you tell me which part number and how many QTY we must be order for both RP & SP memory upgrade?

Best Regards,

Jackson Ku

ankurbhasin · ‎10-05-2005

Hi Jackson,

This link will clear all your doubts

http://www.cisco.com/univercd/cc/td/doc/product/lan/cat6000/cfgnotes/78_15538.htm#wp34951

HTH

Ankur

jackson.ku · ‎10-05-2005

Hi,

So for one WS-SUP720-BASE, we need 2 MEM-MSFC3-1GB, one for RP and one for SP, is it correct?

Best Regards,

Jackson Ku

thisisshanky · ‎10-05-2005

The description of the line item,MEM-MSFC3-1GB says

"1GB Mem for Sup720, Sup720-3B and MSFC2A"

So that should take care of the SP (sup engine) but doesnt look like MSFC3 is supported.

At the same time, MEM-MSFC2-512MB=, the description shows, MSFC3.

"Catalyst 6500 512MB DRAM on the MSFC2 or SUP720 MSFC3, Spare"

Sankar Nair
UC Solutions Architect
Pacific Northwest | CDW
CCIE Collaboration #17135 Emeritus

amit-singh · ‎10-06-2005

Jackson,

Yes, You need 2 MEM-MSFC3-1GB in order to upgrade both the SP and RP to 1 GB each. I used the 2 of them when I upgraded my Sup 720 as there are 2 DRAM dimm slots on SUP 720 and it requires MEM-MSFC3-1GB in each DIMM in order to upgrade the RP and SP both to 1 GB.

HTH,

-amit singh

jackson.ku · ‎10-06-2005

Hi Amit,

Thanks for your answer.

Best Regards,

Jackson Ku