10-07-2005 08:19 AM
Hello,
is(are) there a corresponding snmp OID value(s) for
show rtr enhanced-history collection-statistics
or show ip sla monitor enhanced-history collection-statistics ?
I looked through the CISCO-RTTMOM-MIB and there is no information about it.
I think it is not possible to read it via snmp protocol.
To test I used: c2500-is-l.123-16
Thx,
Pawel
10-09-2005 02:39 AM
Maybe, your test device doesn't support it cause there is an RTTMON jitter table in RTTMON MIB. Have a look at this doc:
10-09-2005 11:29 PM
Hello Georg,
Thanks for your replay. My device supports the RTTMON MIB and I am able to configure jitter probe on it (and it works). Following the information You provided (your www link), there ara two table in that mib: rttMonStats, rttMonLatestJitterOper and I can read the values related with it. The clue problem of my problem is to read the values related exactly with two show commands and rttMonStats, rttMonLatestJitterOper does not contains those values.
09-01-2006 01:24 PM
Hi, I'm also trying to gather stats from "sh ip sla monitor enhanced-history collection-statistics" but I can't find the oid. Even just the RTTSum and NumOfRTT and min and max would be helpful. Any help here would be greatly appreciated!
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide