×

Warning message

  • Cisco Support Forums is in Read Only mode while the site is being migrated.
  • Cisco Support Forums is in Read Only mode while the site is being migrated.

SNMP source on CSS

Unanswered Question
Oct 19th, 2005
User Badges:

Is there any way to set the source of SNMP traps? We don't use management interface therefore it has 0.0.0.0 as IP address. When CSS generates an SNMP trap it sets SNMP source as 0.0.0.0 which is a problem for many SNMP tools to recongnize a real source of traps.


Thanks

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
Gilles Dufour Thu, 10/20/2005 - 07:42
User Badges:
  • Cisco Employee,

is it the ip address of the ip packet on the network ??

Or is it the ip address contained in the snmp header ?

Do you have a sniffer trace showing this ?


There is a command 'snmp trap-source' but it only modifies the ip address within the snmp header.

You can give it a try so and see if this works for you.


Regards,


Gilles.

Thanks for rating this answer.

savyer Thu, 10/20/2005 - 18:23
User Badges:


Source in the SNMP hearder. IP header looks correct.

I'll try that command tomorrow.


Thanks!

Actions

This Discussion