Hi,
can someone tell me how to use those attributs with cat 6509 (version 12.2 (18) SXD4.
because they don' t run when i try to implement them .
here is an example of the config i try to implement:
route-map metric permit 10
set metric 1
route-map solmetric permit 10
match metric 1
6509-C(config)#router bgp 100
6509-C(config-router)#raddress-family ipv4 vrf vrf2
6509-C(config-router-af)#redistribute connected route-map metric out
6509-C(config)#router bgp 100
6509-C(config-router)#raddress-family ipv4 vrf vrfST
6509-C(config-router-af)#neighbor 210.10.10.2 route-map solmetric in
% "solmetric" used as BGP inbound route-map, metric match not supported %
Thank