×

Warning message

  • Cisco Support Forums is in Read Only mode while the site is being migrated.
  • Cisco Support Forums is in Read Only mode while the site is being migrated.

monitoring VPN3000 from CWLMS - 2.1

Unanswered Question
Oct 20th, 2005
User Badges:

Trying to configure a VPN300 device for monitoring from CWLMS-2.1. The VPN3000 has SNMP server configuration page, where one can configure the community string. The problem is, it does not say whether it's the read or read/write community string and anny attempts to add this device to my CWLMS have been unsuccessfull because of the wrong community string. Has anybody managed to successfully do this?


Thanks.

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
nhabib Thu, 10/20/2005 - 08:22
User Badges:
  • Red, 2250 points or more

VPN 3000 has Read Only SNMP access. There is no RW string.

axfalk Thu, 10/20/2005 - 09:03
User Badges:

Thanks for your response. I must be doing something wrong as I can't even send an SNMP getnext request from the management station to the device. The ping and traceroute work OK. The SNMP is enabled on the VPN 3000 box and the port 161 is opened.The Community string on the VPN 3000 box is identical to the one I am using for sending an SNMP getnext request. Is there a seting on the VPN 3000 I am missing?


Thanks again.

Actions

This Discussion