10-27-2005 02:39 AM
I 'm looking for a simple configuration of MPLS between 3 routers (or 2 routers).
Somebody can help me ?
Best regards.
10-27-2005 02:58 AM
Dear stephtchoko,
MPLS is a great technologies its easy to take and running script from the internet and post it on your router then everything gone be working but its very nice to understand how its working because your life gone be under control (I mean you have to understand the technologies how its works to troubleshoot your network in any case)
Here is a simple configuration to get mpls working with 2 routers
Topology: Router1 Serial0 connected with Router2 via Serial2
Router1 S0/0 Router2 S0/0
((Router1))
Router1(config)# ip cef
Router1(config)# mpls label protocol tdp
Router1(config)# tag-switching tdp router-id serial0/0
Router1(config)# mpls ldp logging neighbor-changes
interface Serial0/0
ip address 172.16.1.1 255.255.255.252
no shut
tag-switching ip
((Router2))
Router2(config)# ip cef
Router2(config)# mpls label protocol tdp
Router2(config)# tag-switching tdp router-id serial0/0
Router2(config)# mpls ldp logging neighbor-changes
interface Serial0/0
ip address 172.16.1.2 255.255.255.252
no shut
tag-switching ip
please be informed that you have to use any routing protocol to start advertise the L3 information.
http://www.cisco.com/en/US/tech/tk436/tk428/technologies_configuration_example09186a0080093fcc.shtml
Best Regards,
Mounir Mohamed
10-31-2005 08:19 AM
i built my test mpls network using this page
http://www.informit.com/articles/article.asp?p=391649&seqNum=2&rl=1
and 3 x 2811 routers (2 PE's and 1 P)
and 2 x 2621 routers as the "CE" which dont run MPLS themselves...
10-31-2005 10:52 AM
the document is good, but is everything working with you or you facing a problem?
11-01-2005 11:38 PM
yes, ThanK.This is my first experience with this protocol (MPLS).Which type of routing protocol ( isis, ospf) do you think, it is more adapatable with mpls in isp network ?
Best regards
11-02-2005 10:37 AM
ISIS is recommended in service provider networks and it's more sclabel than OSPF
11-03-2005 11:00 PM
please what is main reason isis is more scalable than ospf ?
Best regards.
11-06-2005 01:23 AM
Dear Steph,
Kindly check the following URL
http://www.cisco.com/en/US/tech/tk436/tk428/technologies_configuration_example09186a0080093fcc.shtml
Best Regards,
Mounir Mohamed
04-16-2006 09:38 PM
Hi
H r u
I am Abdul Khadeer from chennai . i had compeleted the ccna course but not certification .plz if do u have any dumps plz send it to me .so I am planing to give the exam
11-06-2005 05:26 AM
03-26-2006 11:20 PM
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: