10-31-2005 09:52 AM - edited 03-13-2019 11:03 AM
I have read that you can use the E&M VIC Card to source Moh from a live feed, such as a radio broadcast.
Has anyone done this before, what is the setup and physical connectivity like from the e&M Card to the radio.
Thanks
11-01-2005 12:37 AM
Hi
See this part of the manual;
Regards
Aaron
11-03-2005 06:22 AM
Harrison,
I have read this up in the manual. Have you done this yourself? what was the source of your moh stream file?
How did you connect it up, besides the E&m card, did you use any other device?
If someone out there has set this up before, please tell me how it was done. Thanks
11-03-2005 07:08 AM
Hi aaron,
Thank you again for your suggestion on Moh from a live feed.
Do you have any other bright ideas on how to setup paging in CME, so that you can page from the speakers on the IP Phones as well as external speakers in the building?
Cheers
11-12-2005 06:08 PM
I have set up MOH using a live feed. We were using a promotion on hold box but any audio source with a head set jack works. Your just hoodk it up to the pins on the e&m card specified in the manual. Also I have configured paging through the phones. I have not done external paging but it should not be a problem.
11-13-2005 04:43 AM
Hi
Paging to phones is a standard feature:
http://www.cisco.com/univercd/cc/td/doc/product/voice/its/cme33/cme33sa/cme33prd.htm#wp2175048
I suppose you could set up external paging using an IP phone hooked up to speakers as referenced here:
http://www.mml.uni-hannover.de/einhorn/headset/index_e.html
I haven't tried this though...
Regards
Aaron
p.s. please rate helpful posts...
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide