×

Warning message

  • Cisco Support Forums is in Read Only mode while the site is being migrated.
  • Cisco Support Forums is in Read Only mode while the site is being migrated.

CS-MARS Topology

Unanswered Question
Nov 1st, 2005
User Badges:

Why doesn't the topology show the correct connections between devices? For example I have a Router connected to an ASA applicance and it shows the router in a segment by itself even though these devices are on the same subnet.


Thanks

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
pradeepde Mon, 11/07/2005 - 13:46
User Badges:
  • Bronze, 100 points or more

Enter the Access IP address and Reporting IP address (the IP address of the device as it appears to the CS-MARS) of the switch. The Reporting IP address is usually the same as the Access IP address, but if you are using FTP as Access Type, it must be a different IP address. The Reporting IP address is required if the device is sending syslog data to the CS-MARS

Actions

This Discussion