11-01-2005 10:24 PM - edited 03-13-2019 11:05 AM
Hi
I am configuring a demo system on a 2811. The phones is 7960, 7920 and just about every model on the market :-)
I have found the loud ringtones for the 7920 and the Ringlist.xml. Where do i find the other ringtones listed in Ringlist.xml ?
The 7960 phones is looking for a distingtiveringlist.xml. Is it possible to make distingtive ringing on CME ?
How ?
/Per
11-07-2005 01:51 PM
Set tftp-server command to allow access to the files
e.g. tftp-server flash:RingList.xml
tftp-server flash:Piano1.raw
tftp-server flash:Chime.raw
Reboot the IP Phones. When IP Phones are rebooted, the IP Phones will get the files and show the ring types in Ring Type Option list under Settings.
http://www.cisco.com/univercd/cc/td/doc/product/voice/c_callmg/3_0/admin_gd/3_0_9/a3rings.htm
11-08-2005 01:59 AM
Thanks :-)
Yes i know. The phones show the ringtones. But where do i get the .raw files from. There are no .raw files on a cme system, and i havent been able to find them on cisco.com. Guess they must be part of the CM installation kit.
/Per
11-08-2005 02:30 AM
Hi
There are no ring tones supplied with CME except the default two which are embedded in the phone firmware...
If you want others you could steal them from a CM installation (although the ones that come with that are fairly silly), or make your own - they're just wave files in a specific format... See this url:
See this URL for details of what spec the file has to be:
Or you might find some on the web - e.g. this one from 24 on TV:
http://www.ccir.ed.ac.uk/~jad/ringtone.html
Aaron
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide