×

Warning message

  • Cisco Support Forums is in Read Only mode while the site is being migrated.
  • Cisco Support Forums is in Read Only mode while the site is being migrated.

disable routing in catalyst 6000

Unanswered Question
Nov 6th, 2005
User Badges:

We have a Catalyst 600 with the following routing configuration:


#sh ip route connect

C 192.168.1.0/24 is directly connected, Vlan3

134.0.0.0/16 is variably subnetted, 90 subnets, 3 masks

C 134.0.11.0/24 is directly connected, Vlan1


Question: How do I disable routing between Vlan 3 and Vlan 1 ?


  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
ashok_boin Sun, 11/06/2005 - 21:45
User Badges:
  • Bronze, 100 points or more

Hi,


Apply ACLs.As far as I know, there is no other configuration to disable routing b/w directly connected networks of a router.


-Ashok.



r-so Sun, 11/06/2005 - 22:16
User Badges:

I'm not a Cisco guy, but I found more info which may help:


router eigrp 10

redistribute connected

network 10.0.0.0

network 134.0.0.0

network 192.168.1.0

no auto-summary



Actions

This Discussion