×

Warning message

  • Cisco Support Forums is in Read Only mode while the site is being migrated.
  • Cisco Support Forums is in Read Only mode while the site is being migrated.

tacacs on a 1924

Answered Question
Nov 8th, 2005
User Badges:
  • Purple, 4500 points or more

Can tacacs be configured for first level access also and not just the enable mode ? Haven't been able to find an answer ,though just by looking at the config options it just looks like you can just do the enable mode .

Correct Answer by pvezina about 11 years 9 months ago

We are using TACACS for our 1924s and we are configured for first level access. When the user wants to go to privileged exec, he needs to type the enable password. This is the config we use:


login tacacs

tacacs-server key secretkey

tacacs-server host "a.b.c.d"

tacacs-server last-resort password


We are using software 9.00.07.

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.
Correct Answer
pvezina Wed, 11/09/2005 - 08:17
User Badges:

We are using TACACS for our 1924s and we are configured for first level access. When the user wants to go to privileged exec, he needs to type the enable password. This is the config we use:


login tacacs

tacacs-server key secretkey

tacacs-server host "a.b.c.d"

tacacs-server last-resort password


We are using software 9.00.07.

glen.grant Thu, 11/10/2005 - 08:34
User Badges:
  • Purple, 4500 points or more

Thanks , the only thing missing was login tacacs .

Actions

This Discussion