×

Warning message

  • Cisco Support Forums is in Read Only mode while the site is being migrated.
  • Cisco Support Forums is in Read Only mode while the site is being migrated.

Port redirection and HTTPS

Unanswered Question
Nov 8th, 2005
User Badges:

Will a PIX 506 v6.1 support redirection of port 443 to an internal web server? I notice there is no fixup protocol https 443 command. The intent here is to allow only HTTPS traffic to the web interface of an Exchange Server. Many thanks in advance.

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
Patrick Iseli Tue, 11/08/2005 - 10:29
User Badges:
  • Gold, 750 points or more

Yes this is possible.


example config with just one public IP:


access-list acl_out permit tcp any interface outside eq https

access-group acl_out in interface outside

static (inside,outside) tcp interface https ExchangeIP-Private https netmask 255.255.255.255 0 0


Command Reference:

http://www.cisco.com/en/US/products/sw/secursw/ps2120/products_command_reference_chapter09186a00800ec9eb.html#1026694


sincerely

Patrick


Actions

This Discussion