×

Warning message

  • Cisco Support Forums is in Read Only mode while the site is being migrated.
  • Cisco Support Forums is in Read Only mode while the site is being migrated.

1200 aironet

Unanswered Question
Nov 9th, 2005
User Badges:

Hi All,


I would like to configure my 1200 aironet AP from the console.

When I power on the AP, I can not get the prompt ">". Instead I get "Auto so forth and so on".

how do i get to the user mode?


Thanks,

paul

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
ciscoVOIP7960 Thu, 11/10/2005 - 19:00
User Badges:

will.shaw,


first of all thanks for the reply.

How can I tell if it is using IOS software or VxWorks?


thanks!

paul

will.shaw Fri, 11/11/2005 - 03:36
User Badges:

When you console to the router initially, do you have the option to choose 'no' to the auto setup?


It might be worth going through the auto setup to configure an IP address, that way you can then access it via the Web interface, which will quickly tell you what software is running.


Usually if it's running IOS, and no configuration exists, you'll be prompted on startup to enter express setup with a yes/no option. when you select no, it should just witch to the ap> prompt.

Actions

This Discussion