×

Warning message

  • Cisco Support Forums is in Read Only mode while the site is being migrated.
  • Cisco Support Forums is in Read Only mode while the site is being migrated.
Georg Pauwen Tue, 11/15/2005 - 08:28
User Badges:
  • Purple, 4500 points or more
  • Cisco Designated VIP,

    2017 WAN

Hello,


you could try and limit the bandwidth per VLAN in a class-based configuration, here is an example:


access-list 1 permit 192.168.1.0

!

class-map VLAN_100

match access-group 1

!

policy-map VLAN_BANDWIDTH

class VLAN_100

police 10000000 4000000 exceed-action drop

!

interface GigabitEthernet0/1

service-policy input VLAN_BANDWIDTH


In this example, the VLAN for which you want to limit bandwidth has the IP address space 192.168.1.0/24. Bandwidth is policed to a maximum of 10MB, with a 4MB burst rate...


Can you try and see if this works for you ?


Regards,


GP

mireikakazu Thu, 12/01/2005 - 16:53
User Badges:

It's not applicable. "Service-policy" cannot be implemented in a virtual interface (Etherchannel).

Actions

This Discussion