11-17-2005 11:46 AM - edited 03-15-2019 03:52 AM
Is there a way on the CallManager 4.1.3 and or the 7960 to have a line appearance with no ringing. For example 1000(line1) will ring if dialed to from the outside or other extensions but 1001(line2) will not ring if dialed to, all on the same phone. I know the Nortel Meridian System can do this easily, unsure if MCS can.
Solved! Go to Solution.
11-17-2005 11:51 AM
Yes, in DN configuration you can set the Ring Setting to Disable or Flash Only.
Hope this helps. If so, please rate the post.
Thanks,
Brandon
11-17-2005 11:51 AM
Yes, in DN configuration you can set the Ring Setting to Disable or Flash Only.
Hope this helps. If so, please rate the post.
Thanks,
Brandon
11-18-2005 06:14 AM
Works like a charm
Thanks for your help
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: