11-18-2005 08:07 PM - edited 03-13-2019 11:16 AM
What is the best way to troubleshoot Outside Dial Tone.
I am supposed to get the offnet dial Tone right after I pressed Digit 9 on IP Phone instead the Offnet Dial Tone appears after pressing 9 and then 1.
11-18-2005 10:28 PM
Check this good document:
HTH
11-21-2005 11:01 AM
I nailed down the problem, but I am not sure how do I get around with this issue. The problem is that the Customer Main Number is 713-807-9746, and I configured a Route Point to map the main number with the internal receptionist. DN "9746" is registered with the Call Manager, and it causing a Outside Dial Tone Problem.
Thanks,
11-21-2005 09:58 PM
Hi,
Change the Internal receptionist number.
Then create a Translation pattern 9746, and make sure that Provide Outside Dial Tone is checked, change the Called Party Transform Mask to the Internal Receptionist new number, and that should do the trick, dont forget to check partitions and CSS.
HTH
Gonzalo
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide