11-20-2005 02:53 PM - edited 03-13-2019 11:17 AM
Anybody use a Vg224 with CME before. Anything documentation or sample config. Anything I need to look out for?
11-20-2005 11:07 PM
Hi Vin,
Check out this very good doc:
HTH
Gonzalo
11-21-2005 04:33 PM
Hi
I saw the documentation. Thank you. However do you know how it is configured on the cme router. For example what do we use for MAC address and phone type.
11-21-2005 04:51 PM
on the vg224, say the ip address is 10.10.10.10
voice-port 2/0 (and so on)
dial-peer voice 100 pots
destination-pattern 100
port 2/0
(and so on)
on the cme router
dial-peer voice 100 voip
destination-pattern 1..
session target ipv4:10.10.10.10
codec g711ulaw
no vad
11-24-2005 04:46 AM
Hi
This is H323 configuration not Skinny. I want to configure VG224 using Skinny like the documentation. The documentation mention how to configure Skinny on the VG224 but does not show how to configure on CME.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: