Warning message

  • Cisco Support Forums is in Read Only mode while the site is being migrated.
  • Cisco Support Forums is in Read Only mode while the site is being migrated.

SRST Config

Unanswered Question
Nov 25th, 2005
User Badges:
  • Super Bronze, 10000 points or more
  • Community Spotlight Award,

    Member's Choice, May 2015


Anyone know if it's possible to configure hunt groups in SRST?

And if it is, is it possible to do it using a H323 gateway?

When in H323 mode, does any configuration hunt groups and so on cause other problems (like things matching dial-peers other than the ones that point to CallManager whilst in non-SRST mode)?

I'm thinking mainly of a site which (for example) has each phone with a DDI (no problem there), and a main number which would normally go to a CallManager hunt group or other queue... in SRST mode, is it possible to have a hunt group configured?



  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
p-kitaka Fri, 11/25/2005 - 13:01
User Badges:

I've achieved sequential hunt group functionality in SRST by using the alias command


no huntstop

alias 1 7777 to 7701 preference 1

alias 2 7777 to 7702 preference 2

alias 3 7777 to 7703 preference 3

alias 4 7777 to 7704 preference 4

alias 5 7777 to 7705 preference 5 huntstop


msolak Sat, 11/26/2005 - 05:30
User Badges:
  • Silver, 250 points or more


virtuell numbers or hunt-groups (same as callmanager, with routing options such longest idle etc.) are not possible in srst, but you can configure alias or dialplan-pattern for numbers (pilotpoint etc) that can not fall in srst mode.




This Discussion