3825 Doesn't boot

Unanswered Question
Dec 2nd, 2005

I'm receiving this on a 3825:

program load complete, entry point: 0x8000f000, size: 0xc0c0

Initializing ATA monitor library.......

program load complete, entry point: 0x8000f000, size: 0xc0c0

Initializing ATA monitor library.......

loadprog: error - on read during ELF program load

requested 27157520 (0x19e6410) bytes, got 16748852 (0xff9134)

open: failed to find and/or load the bootloader: "flash:c3825-spservicesk9-mz.123-11.T8.bin"

loadprog: error - on file open

boot: cannot load "c3825-spservicesk9-mz.123-11.T8.bin"

System Bootstrap, Version 12.3(11r)T1, RELEASE SOFTWARE (fc1)

Technical Support: http://www.cisco.com/techsupport

Copyright (c) 2004 by cisco Systems, Inc.

System Bootstrap, Version 12.3(11r)T2, RELEASE SOFTWARE (fc1)

Technical Support: http://www.cisco.com/techsupport

Copyright (c) 2005 by cisco Systems, Inc.

Total memory size = 256 MB - DIMM0 = 256 MB, DIMM1 = 0 MB

c3825 processor with 262144 Kbytes of main memory

Main memory is configured to 72/0(dimm 0/1) bit mode with ECC enabled

Upgrade ROMMON initialized

program load complete, entry point: 0x8000f000, size: 0xc0c0

Initializing ATA monitor library.......

program load complete, entry point: 0x8000f000, size: 0xc0c0

Initializing ATA monitor library.......

loadprog: error - on read during ELF program load

requested 27157520 (0x19e6410) bytes, got 16748852 (0xff9134)

boot: cannot load "flash:"

System Bootstrap, Version 12.3(11r)T1, RELEASE SOFTWARE (fc1)

Technical Support: http://www.cisco.com/techsupport

Copyright (c) 2004 by cisco Systems, Inc.

System Bootstrap, Version 12.3(11r)T2, RELEASE SOFTWARE (fc1)

Technical Support: http://www.cisco.com/techsupport

Copyright (c) 2005 by cisco Systems, Inc.

Total memory size = 256 MB - DIMM0 = 256 MB, DIMM1 = 0 MB

c3825 processor with 262144 Kbytes of main memory

Main memory is configured to 72/0(dimm 0/1) bit mode with ECC enabled

Upgrade ROMMON initialized

program load complete, entry point: 0x8000f000, size: 0xc0c0

Initializing ATA monitor library.......

program load complete, entry point: 0x8000f000, size: 0xc0c0

Initializing ATA monitor library.......

loadprog: error - on read during ELF program load

requested 27157520 (0x19e6410) bytes, got 16748852 (0xff9134)

boot: cannot load "flash:"

System Bootstrap, Version 12.3(11r)T1, RELEASE SOFTWARE (fc1)

Technical Support: http://www.cisco.com/techsupport

Copyright (c) 2004 by cisco Systems, Inc.

System Bootstrap, Version 12.3(11r)T2, RELEASE SOFTWARE (fc1)

Technical Support: http://www.cisco.com/techsupport

Copyright (c) 2005 by cisco Systems, Inc.

Total memory size = 256 MB - DIMM0 = 256 MB, DIMM1 = 0 MB

c3825 processor with 262144 Kbytes of main memory

Main memory is configured to 72/0(dimm 0/1) bit mode with ECC enabled

Upgrade ROMMON initialized

rommon 1 >

I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Average Rating: 0 (0 ratings)
thisisshanky Sat, 12/03/2005 - 10:02

You should be able to use the CF slot on 3825 , copy an image into the CF card and boot from it from rommon.

Actions

Login or Register to take actions

This Discussion

Posted December 2, 2005 at 4:09 PM
Stats:
Replies:2 Avg. Rating:
Views:747 Votes:0
Shares:0
Tags: No tags.

Discussions Leaderboard

Rank Username Points
1 2,069
2 1,732
3 1,675
4 1,624
5 1,529