12-02-2005 04:09 PM - edited 03-03-2019 01:00 AM
I'm receiving this on a 3825:
program load complete, entry point: 0x8000f000, size: 0xc0c0
Initializing ATA monitor library.......
program load complete, entry point: 0x8000f000, size: 0xc0c0
Initializing ATA monitor library.......
loadprog: error - on read during ELF program load
requested 27157520 (0x19e6410) bytes, got 16748852 (0xff9134)
open: failed to find and/or load the bootloader: "flash:c3825-spservicesk9-mz.123-11.T8.bin"
loadprog: error - on file open
boot: cannot load "c3825-spservicesk9-mz.123-11.T8.bin"
System Bootstrap, Version 12.3(11r)T1, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 2004 by cisco Systems, Inc.
System Bootstrap, Version 12.3(11r)T2, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 2005 by cisco Systems, Inc.
Total memory size = 256 MB - DIMM0 = 256 MB, DIMM1 = 0 MB
c3825 processor with 262144 Kbytes of main memory
Main memory is configured to 72/0(dimm 0/1) bit mode with ECC enabled
Upgrade ROMMON initialized
program load complete, entry point: 0x8000f000, size: 0xc0c0
Initializing ATA monitor library.......
program load complete, entry point: 0x8000f000, size: 0xc0c0
Initializing ATA monitor library.......
loadprog: error - on read during ELF program load
requested 27157520 (0x19e6410) bytes, got 16748852 (0xff9134)
boot: cannot load "flash:"
System Bootstrap, Version 12.3(11r)T1, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 2004 by cisco Systems, Inc.
System Bootstrap, Version 12.3(11r)T2, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 2005 by cisco Systems, Inc.
Total memory size = 256 MB - DIMM0 = 256 MB, DIMM1 = 0 MB
c3825 processor with 262144 Kbytes of main memory
Main memory is configured to 72/0(dimm 0/1) bit mode with ECC enabled
Upgrade ROMMON initialized
program load complete, entry point: 0x8000f000, size: 0xc0c0
Initializing ATA monitor library.......
program load complete, entry point: 0x8000f000, size: 0xc0c0
Initializing ATA monitor library.......
loadprog: error - on read during ELF program load
requested 27157520 (0x19e6410) bytes, got 16748852 (0xff9134)
boot: cannot load "flash:"
System Bootstrap, Version 12.3(11r)T1, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 2004 by cisco Systems, Inc.
System Bootstrap, Version 12.3(11r)T2, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 2005 by cisco Systems, Inc.
Total memory size = 256 MB - DIMM0 = 256 MB, DIMM1 = 0 MB
c3825 processor with 262144 Kbytes of main memory
Main memory is configured to 72/0(dimm 0/1) bit mode with ECC enabled
Upgrade ROMMON initialized
rommon 1 >
12-02-2005 04:55 PM
Appears, the IOS image is corrupted.
Follow the link below to load a valid image.
http://www.cisco.com/en/US/products/ps5854/prod_configuration_guide09186a00802c35e9.html#wp1051098
Good Luck!!
HTH,
Sundar
12-03-2005 10:02 AM
You should be able to use the CF slot on 3825 , copy an image into the CF card and boot from it from rommon.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide