Specifying static routes to a PIX

nerdv · ‎12-05-2005

scenario:

core routers connected via vlan 15 to a pix device. everytime a route is specified i used the next hop as vlan 15 ( the interface) rather than the ip address of the PIX device. is this a security issue and would it be a issue with proxy-arp?

tx

sidd

Report Inappropriate Content · ‎12-12-2005

PIX performs the routing process based on the directly connected routes, static routes and OSPF - available in the latest PIX 6.3 version.

Static routes are directly linked to the outbound interface that connects to the next hope router. This adds more extra security.

Syntax:

#route

//Example: default route is allowed only through the outside interface.