Controller T1 won't change pri-group

Unanswered Question
Dec 5th, 2005
User Badges:
  • Bronze, 100 points or more

How do I get around this problem? The voice interface and controller are shut down, I've rebooted, etc.

MIA-2811(config)#controller t1 0/2/0


MIA-2811(config-controller)#pri-group time

MIA-2811(config-controller)#pri-group timeslots 1-14,24

%Voice interface must be shutdown before updating configuration.

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (2 ratings)
Hin Lee Mon, 12/05/2005 - 16:33
User Badges:
  • Cisco Employee,

did you try

no pri-group timeslots ..... for your existing config.

ewmcg Mon, 12/05/2005 - 20:32
User Badges:

We had a similiar problem in a Controller where it was not allowing us to assing timeslots 1-24 and it said we needed to shut it down. Turned out we did not have enough DSP Resources.

Jason Aarons Tue, 12/06/2005 - 06:29
User Badges:
  • Bronze, 100 points or more

I called TAC;

voice-port 0/2/0:23


The voice-port was not shutdown -jason


This Discussion