×

Warning message

  • Cisco Support Forums is in Read Only mode while the site is being migrated.
  • Cisco Support Forums is in Read Only mode while the site is being migrated.

MDS 9216 with no OS on it, need help

Unanswered Question
Dec 7th, 2005
User Badges:

Hello,

We just received a 9216 as a replacement for our existing 9216 having trouble and it does not have any SANOS image on it, boots in monitor mode. any documentation would be highly appreciated, also how can i access the gui one i have loaded the OS and give it a management address?


I will surely rate this post.

Thanks

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.
tblancha Wed, 12/07/2005 - 09:38
User Badges:
  • Cisco Employee,

Following is an older sample config on how to recover the SAN-OS. Once it it up & running, all you have to do is point your web browser to the IP address of the mgmt interface and then select Fabric manager and it will install. The FM/DM package is available from the download section of the Cisco website as well.


1.) At the loader prompt, add ip address and default gateway. And then get a kickstart image into memory


Loader>ip address 172.18.172.57 255.255.255.0

Loader> ip default-gateway 172.18.172.1

Loader> boot tftp://172.18.172.79/m9500-sf1ek9-kickstart-mzg.1.2.0.96.bin


2.) It will boot up to a (boot) prompt. So now get a regular image onto bootflash and boot it.


Switch(boot)# config t

Switch(boot)(config)# interface mgmt 0

Switch(boot)(config-mgmt0)# ip address 172.18.172.57 255.255.255.0

Switch(boot)(config-mgmt0)# no shut

Switch(boot)(config-mgmt0)# exit

Switch(boot)(config)# ip default-gateway 172.18.172.1

Switch(boot)(config)# exit

Switch(boot)# copy tftp:m9500-sf1ek9-mzg.1.2.0.96.bin bootflash:m9500-sf1ek9-mzg.1.2.0.96.bin

Switch(boot)# load bootflash:m9500-sf1ek9-mzg.1.2.0.96.bin


3.) The switch should come up in normal mode and you will be able to login. But you need to set the boot variables at this time. First get the kickstart image onto bootflash.


Switch# copy tftp://172.18.172.79/m9500-sf1ek9-kickstart-mzg.1.2.0.96.bin bootflash:///m9500-sf1ek9-kickstart-mzg.1.2.0.96.bin

Switch# config t

Switch(config)# boot kickstart bootflash: m9500-sf1ek9-kickstart-mzg.1.2.0.96.bin

Switch(config)# exit

Switch# copy running-config startup-config

Actions

This Discussion

 

 

Trending Topics: Storage Networking