12-08-2005 03:46 AM - edited 02-21-2020 02:08 PM
Hello,
I'm running a pixes on 6.3(x) code.
I setup the vpn groups correctly, with groups and so on. I also add users by using the username command in the config, but when I vpn into the PIX I do not get asked for a username or password? Is there something I'm missing to get it to do this?
Cheers.
12-08-2005 04:33 AM
please verify the current config with the sample codes below, which are for the local authentication.
aaa-server LOCAL protocol local
crypto map remote_vpn client authentication LOCAL
crypto map remote_vpn client configuration address initiate
crypto map remote_vpn client configuration address respond
12-08-2005 04:41 AM
Hi Jackko,
I have aaa-server LOCAL protocol local present in the config but none of the others on my crypto map's.
Cheers.
12-08-2005 12:01 PM
please add the rest to the current config and let us know how you go.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide