×

Warning message

  • Cisco Support Forums is in Read Only mode while the site is being migrated.
  • Cisco Support Forums is in Read Only mode while the site is being migrated.

HICOM Name transfer to IP Phones not correct

Unanswered Question
Dec 15th, 2005
User Badges:

Hello,


I have a question regarding the right debug /trace commands or a solution for the following problem. The environment for the problems are the following

HICOM<->QSIG trunk to <-> 2801 MGCP Gateway<-> Callmanager 4.1(3) SR1



The problem is a caller name transfer problem from the HICOM to the IP Phones. If a Hicom Phone call a IP Phone and the name from the Hicom user have a “ä, ö or ü” it was not displayed correctly on the IP Phone. Here are an example Schütze was dislayed as Sch]tze. I saw in the CCM trace Sch]tze but Id don’t now if the names comes already from the Hicom.


I need the right debug commands or traces to see if the name comes right or wrong via the qsig trunk.

Thx for help

Joerg



  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
a-vazquez Wed, 12/21/2005 - 12:01
User Badges:
  • Silver, 250 points or more

Change the locale for the IP Phones to the appropriate language used by HiCom users.

Actions

This Discussion