SNMP OID to get Serial Number

Unanswered Question
Dec 20th, 2005

Hello,

Does any know the OID in order to extract the serial number from an access point? we are using 1230-B-A-K9 radios

I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Klaus Kastens Tue, 12/20/2005 - 22:29

Walk ENTITY-MIB::entPhysicalSerialNum (1.3.6.1.2.1.47.1.1.1.1.11),

there are several entries: chassis, radio, ...

Part of entPhysicalTable for AP1242AG

ENTITY-MIB::entPhysicalDescr.1 = "Cisco Aironet 1240 Series (IEEE 802.11a/g) Access Point"

ENTITY-MIB::entPhysicalDescr.2 = "802.11G Radio"

ENTITY-MIB::entPhysicalDescr.3 = "802.11A Radio"

ENTITY-MIB::entPhysicalDescr.4 = "PowerPCElvis Ethernet"

ENTITY-MIB::entPhysicalSerialNum.1 = "FCZXXXXXXXX"

ENTITY-MIB::entPhysicalSerialNum.2 = "GAMXXXXXXXX"

ENTITY-MIB::entPhysicalSerialNum.3 = "ALPXXXXXXXX"

ENTITY-MIB::entPhysicalSerialNum.4 = ""

ENTITY-MIB::entPhysicalModelName.1 = "AIR-AP1242AG-E-K9 "

ENTITY-MIB::entPhysicalModelName.2 = "Radio AIR-AP1242GR:5M80.13"

ENTITY-MIB::entPhysicalModelName.3 = "Radio AIR-AP1242A:5M80.13"

ENTITY-MIB::entPhysicalModelName.4 = ""

OIDs numerically (entPhysicalSerialNum only)

1.3.6.1.2.1.47.1.1.1.1.11.1 = "FCZXXXXXXXX"

1.3.6.1.2.1.47.1.1.1.1.11.2 = "GAMXXXXXXXX"

1.3.6.1.2.1.47.1.1.1.1.11.3 = "ALPXXXXXXXX"

1.3.6.1.2.1.47.1.1.1.1.11.4 = ""

Actions

Login or Register to take actions

This Discussion

Posted December 20, 2005 at 10:56 AM
Stats:
Replies:1 Overall Rating:
Views:5602 Votes:0
Shares:1
Tags: No tags.
 

Discussions Leaderboard

Rank Username Points
1
Scott Fella
3,325
2
Stephen Rodriguez
1,515
3
George Stefanick
1,299
4
Leo Laohoo
800
5
Manannalage ras...
651
Rank Username Points
Manannalage ras...
28
Scott Fella
15
George Stefanick
15
Stephen Rodriguez
15
V B
13

Trending Topics - Security & Network