×

Warning message

  • Cisco Support Forums is in Read Only mode while the site is being migrated.
  • Cisco Support Forums is in Read Only mode while the site is being migrated.

how to create a ipsec L2L tunnel between two VPNC

Unanswered Question
Jan 3rd, 2006
User Badges:

hi, I'm having problems establishing an IPSEC L2L tunnel between 2 VPN concentrators (vpn3000) checked on the logs and gives me this:


749 01/03/2006 16:49:52.750 SEV=4 IKE/41 RPT=134 x.x.x.x

IKE Initiator: New Phase 1, Intf 2, IKE Peer x.x.x.x

local Proxy Address y.y.y.y, remote Proxy Address x.x.x.x,

SA (L2L: site 1 - site 1)


please help

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
Anonymous (not verified) Mon, 01/09/2006 - 07:29
User Badges:

Before attempting this configuration, please ensure that your networking devices meet the following prerequisites:


Router Requirements - The AES feature was introduced in Cisco IOS Software Release 12.2(13)T. To enable AES, your router must support IPSec and run an IOS image with "k9" long keys (the "k9" subsystem).


Hardware support for AES is also available on Cisco 2600XM, 2691, 3725, and 3745 AES acceleration VPN modules. This feature has no configuration implications and the hardware module is automatically selected if both are available.


VPN Concentrator Requirements - The software support for the AES feature was introduced in release 3.6. Hardware support is provided by the new enhanced, scalable encryption processor (SEP-E). This feature has no configuration implications.


Actions

This Discussion