×

Warning message

  • Cisco Support Forums is in Read Only mode while the site is being migrated.
  • Cisco Support Forums is in Read Only mode while the site is being migrated.

Local LAN Access on VPN Client

Unanswered Question
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
mheusinger Tue, 01/03/2006 - 07:28
User Badges:
  • Green, 3000 points or more

Hi,


as far as I know, you have to configure split tunneling in your VPN concentrator. The client gets the settings from the concentrator and can´t override them.


Hope this helps


Martin

jackko Tue, 01/03/2006 - 15:46
User Badges:
  • Gold, 750 points or more

split tunneling needs to be configured on the concentrator.


1. network list

go configuration | policy management | traffic management | network lists, and click "add".

put the concentrator inside subnet or the list of resources to be accessed by remote vpn client.


2. enable split tunneling

go configuration | user management | groups, and select the remote vpn group.

select "only tunnel networks in the list" for "split tunneling policy"; and then select the network list being created for "split tunneling network list".

Actions

This Discussion