×

Warning message

  • Cisco Support Forums is in Read Only mode while the site is being migrated.
  • Cisco Support Forums is in Read Only mode while the site is being migrated.

CSM-S "Configuration Sync is not supported by this card"

Unanswered Question

This is the message everytime I try to sync the cards.


NETCSP01#hw-module contentSwitchingModule 5 standby config-sync

Configuration Sync is not supported by this card

NETCSP01#




The are both installed into the same 6513.


Here are the configs


module ContentSwitchingModule 4

ft group 1 vlan 400

priority 30 alt 20

!

vlan 200 client

description Client Facing CSM Interface

ip address 192.168.100.6 255.255.254.0 alt 192.168.100.7 255.255.254.0

alias 192.168.100.8 255.255.254.0

!

vlan 100 server

description Server Facing CSM Interface

ip address 172.18.10.6 255.255.254.0 alt 172.18.10.7 255.255.254.0

alias 172.18.10.8 255.255.254.0


module ContentSwitchingModule 5

ft group 1 vlan 400

priority 20 alt 30



I am running the following version

Cisco Internetwork Operating System Software

IOS (tm) s72033_rp Software (s72033_rp-IPSERVICESK9_WAN-M), Version 12.2(18)SXE4, RELEASE SOFTWARE (fc2)


What am I missing?


Thank you!!

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
mchin345 Wed, 01/11/2006 - 09:03
User Badges:
  • Silver, 250 points or more

The configuration synch feature is supported from CSM-S version 2.1.1. I suggest you upgrade your device for using that feature.



Actions

This Discussion