01-10-2006 04:29 AM - edited 03-03-2019 01:22 AM
Can anyone please tell me how spanning tree decides where to block a certain port, and also how would I change this port so I can block the port on my choosen switch ?
thanks
Carlos
01-10-2006 04:33 AM
Hi Carlos,
It might be worthwhile having a read of this:
http://computer.howstuffworks.com/lan-switch14.htm
Paresh.
01-10-2006 06:48 AM
Hi,
Here is a good document which has a section with an explanation on how STP decides which port to block.
It also explains how you can control which port is blocked by altering the port priority.
Hope that helps
Sarb
01-10-2006 06:49 AM
Sorry here is the link.
http://www.cisco.com/en/US/tech/tk389/tk621/technologies_tech_note09186a00800ae96a.shtml
01-10-2006 06:59 AM
Hi
please find the below how it is
if its useful just rate it
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: