×

Warning message

  • Cisco Support Forums is in Read Only mode while the site is being migrated.
  • Cisco Support Forums is in Read Only mode while the site is being migrated.

Adding IP to Catalyst 3535

Unanswered Question
Jan 12th, 2006
User Badges:

I have tried adding an IP to my Catalyst 3535 by add this:

interface Vlan1

ip address 192.168.5.5 255.255.255.0


then


no shut down


But I can't ping it, do I have to have a network cable into a specific port



  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
stomasko Thu, 01/12/2006 - 06:10
User Badges:
  • Silver, 250 points or more

Do a show ip int brie and make sure VLAN shows up.

Make sure your pc has a network address in the same range as the switch.

Port should not matter unless you changed the vlan of the ports, if that's the case make sure you plug into one that is in VLAN1.


Steve

carl_townshend Thu, 01/12/2006 - 06:31
User Badges:

Hi there


The only things i think it may be are


check what vlan your plugged into, put an ip default gateway on the switch if your on a different lan, nake sure your pc is on the same subnet !!


thanks


Carl

Actions

This Discussion