NATTING

Unanswered Question
Jan 16th, 2006
User Badges:

When using Nat on a router, Can you Nat any traffic that comes in, i.e if I have a router with a lan address of say 10.1.1.0 etc, could I nat say some 172.24.56.0 traffic that comes into the router ?

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
spremkumar Mon, 01/16/2006 - 02:35
User Badges:
  • Red, 2250 points or more

hi


You can try using ip nat outside source command where u will nat the outside source addres.


do refer this link for more info and the usage options/keywords..


http://www.cisco.com/univercd/cc/td/doc/product/software/ios123/123cgcr/ipras_r/ip1_i2g.htm#wp1079462


The below link inturn will throw more lite on a similar scenario..


http://www.cisco.com/warp/public/556/2.html


regds


carl_townshend Mon, 01/16/2006 - 03:06
User Badges:

So is this the normal scenero for doing this, and I gather the outside interface doesnt need to be on the same subnet as whatever addresses you are natting ?

Actions

This Discussion