×

Warning message

  • Cisco Support Forums is in Read Only mode while the site is being migrated.
  • Cisco Support Forums is in Read Only mode while the site is being migrated.

Return code: no resource (47) ; CCM 3.3(4); IP2IP 3825

Unanswered Question
Jan 31st, 2006
User Badges:

Plan:

ipPhone_7940/60 -- CCM 3.3(4) -- 3825(ip2ip_gateway) -- AS5350 -- PSTN


2611:

jk9s2-mz.123-12.bin


3825:

c3825-adventerprisek9_ivs-mz.124-3b.bin



After change Cisco IPIP gateway 2611 to 3825 doesn't calls from ipPhone to PSTN


CCM 3.3(4) looks at 3825 as on h.323 gateway


Configurations doesn't change from 2611 to 3825


########################################################################################

dial-peer voice 1000 voip

description <-- To PSTN -->

destination-pattern 7[04]732......

translate-outgoing calling 15

session target ipv4:x.x.x.x

tech-prefix 22#

dtmf-relay h245-alphanumeric

fax protocol t38 ls-redundancy 5 hs-redundancy 2 fallback pass-through g711alaw

no vad

dial-peer voice 555 voip

answer-address T

dtmf-relay h245-alphanumeric

fax protocol t38 ls-redundancy 5 hs-redundancy 2 fallback cisco

ip qos dscp cs5 media

no vad


voice service voip

allow-connections h323 to h323

fax protocol t38 ls-redundancy 5 hs-redundancy 2 fallback cisco

h323

emptycapability

ip circuit max-calls 1000

ip circuit default only

##########################################################################################

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.

Actions

This Discussion