×

Warning message

  • Cisco Support Forums is in Read Only mode while the site is being migrated.
  • Cisco Support Forums is in Read Only mode while the site is being migrated.
pkhatri Tue, 01/31/2006 - 13:57
User Badges:
  • Purple, 4500 points or more

Hi Todd,


Create an access-list that matches on the addresses/ports used by each:


EIGRP: destination of 224.0.0.10

HSRP: runs on UDP 1985


access-list 101 permit ip any host 224.0.0.10

access-list 101 permit udp any any eq 1985

access-list 101 permit udp any eq 1985 any


Then create a class-map that matches using this ACL:


class-map EIGRP-HSRP

match access-group 101


Then, do whatever it is that you intend to do on this traffic using a policy-map.


Hope that helps - pls rate posts that help.


Regards,

Paresh

Actions

This Discussion