×

Warning message

  • Cisco Support Forums is in Read Only mode while the site is being migrated.
  • Cisco Support Forums is in Read Only mode while the site is being migrated.

upgrade of memory errors for 2620xm routers

Unanswered Question
Feb 1st, 2006
User Badges:

Hi,


I have purchased extra memory to upgrade my memory on my Cisco2620xm from 128mb to 192mb. However when i try and install the extra memory i get the following message :


*** Warning during size main memory test,

expected bus error does not occur above 128 mb of main memory

C2600 platform with 131072 Kbytes of main memory


My research suggests that i need to upgrade my ROmmon to 12.2(8) from the 12.2(7R) it is at the moment.


Can someone advise whether this a physical replacement of the chip or a simple upgrade of the chips operating system ?


If this is a simple upgrade where do i get the software from and is it simple to do ?


cheers


Richard

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
tekha Wed, 02/01/2006 - 05:23
User Badges:
  • Bronze, 100 points or more

You are right you need to upgrade the BOOTprom to 12.2(8r), and it is a physical replacement, the Cisco part number is "BOOT-2600XM-256=".

I usualy go to Kingston's site, because they seem to know everything about memory, including Cisco memory.

http://www.ec.kingston.com/ecom/configurator/modelsinfo.asp?SysID=11803&mfr=Cisco&model=2600XM+Series&Sys=11803-Cisco-2600XM+Series&distributor=0&submit1=Search

Actions

This Discussion