02-08-2006 02:39 AM - edited 03-03-2019 11:41 AM
A Chairde,
I am looking to buy a new Cisco 7606 with Fast Ethernet, Fibre and FLEXWAN Cards, was wondering where I would get the model numbers and newest spec cards.....
Here is configuration of a present 7609 we have.
cnibhco100#SH MODUle ALL
Mod Ports Card Type Model Serial No.
--- ----- -------------------------------------- ------------------ -----------
1 24 CEF720 24 port 1000mb SFP WS-X6724-SFP SAD08250AV4
2 0 2 port adapter Enhanced FlexWAN WS-X6582-2PA JAB08480BB4
3 48 SFM-capable 48 port 10/100/1000mb RJ45 WS-X6548-GE-TX SAD083800G3
5 2 Supervisor Engine 720 (Active) WS-SUP720-3BXL SAD084805WX
Mod MAC addresses Hw Fw Sw Status
--- ---------------------------------- ------ ------------ ------------ -------
1 0011.5cdd.ac54 to 0011.5cdd.ac6b 2.1 12.2(14r)S5 12.2(18)SXE2 Ok
2 0012.4310.cb80 to 0012.4310.cbbf 1.3 12.2(18)SXE2 12.2(18)SXE2 Ok
3 0003.e470.b154 to 0003.e470.b183 10.1 7.2(1) 8.5(0.46)ROC Ok
5 0011.21b5.6ab8 to 0011.21b5.6abb 4.1 8.1(3) 12.2(18)SXE2 Ok
Mod Sub-Module Model Serial Hw Status
--- --------------------------- ------------------ ------------ ------- -------
1 Centralized Forwarding Card WS-F6700-CFC SAL084253B4 2.0 Ok
5 Policy Feature Card 3 WS-F6K-PFC3BXL SAD084802TM 1.4 Ok
5 MSFC3 Daughterboard WS-SUP720 SAD0845099X 2.2 Ok
Mod Online Diag Status
--- -------------------
1 Pass
2 Pass
3 Pass
5 Pass
Solved! Go to Solution.
02-08-2006 02:48 AM
Howdy,
Here's a great link for just that information:
http://www.cisco.com/en/US/products/hw/routers/ps368/products_relevant_interfaces_and_modules.html
Hope that helps - pls rate the post if it does.
Paresh
02-08-2006 02:48 AM
Howdy,
Here's a great link for just that information:
http://www.cisco.com/en/US/products/hw/routers/ps368/products_relevant_interfaces_and_modules.html
Hope that helps - pls rate the post if it does.
Paresh
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: