CME-to-CME with h323 gw + gk

Unanswered Question
Feb 8th, 2006
User Badges:

Hi there :)


I'm trying to connect two CME routers, 2811 with 124T release, to eachother with h323 gateway and gatekeeper config.

1 router is acting as gw and gk, and the other is only configured as gw.

I have tried al kinds of tip's i found on this forum, but no luck whatsoever.

Call's made from fxs ports from gw router to fxs port on gw/gk router work fine, but from ephone to ephone it will not :(.

little sketch: ipphone >> router >> lan >>router>> ipphone.


Would anyone be so kind to post the gatekeeper / gateway parts of a working config with ephone's?.. My config is below, Kind regards MJ.

######################################

Gateway router:


interface FastEthernet0/1

ip address 192.168.4.20 255.255.255.0

duplex auto

speed auto

h323-gateway voip interface

h323-gateway voip id zaak ipaddr 10.10.10.1 1719

h323-gateway voip h323-id gwzaak

h323-gateway voip bind srcaddr 192.168.4.20

#################################

GW + GK router

interface FastEthernet0/1

ip address 192.168.4.10 255.255.255.0

duplex auto

speed auto

h323-gateway voip interface

h323-gateway voip id roel ipaddr 10.10.10.1 1719

h323-gateway voip h323-id gwroel

h323-gateway voip bind srcaddr 192.168.4.10


gatekeeper

zone local roel hollander.local

zone local zaak hollander.local

zone prefix zaak 12*

zone prefix roel 13*

rrq dynamic-prefixes-accept

no shutdown





  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 4 (1 ratings)
Loading.
ebreniz Tue, 02/14/2006 - 08:37
User Badges:
  • Silver, 250 points or more

e-phone dns no longer register with H323 gatekeeper


Will register if there is a dialplan configured as well as a secondary number under ephone dn.


In this two configuration steps are required

a. Under the ephone-dn, configure a "secondary" number

b. Under telephony-service, configure a dialplan-pattern.



Your running into a bug CSCsb39861

Actions

This Discussion