×

Warning message

  • Cisco Support Forums is in Read Only mode while the site is being migrated.
  • Cisco Support Forums is in Read Only mode while the site is being migrated.

CCM Signaling QoS

Unanswered Question
Feb 10th, 2006
User Badges:

What is the best practice for the amount of bandwidth to allocate for various Call Manager signaling (AF31) to WAN connected sites? We use MGCP gateways and SCCP for the phones.


Thanks!



  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.
thisisshanky Fri, 02/10/2006 - 12:24
User Badges:
  • Purple, 4500 points or more

Refer to the appropriate SRND guide for recommendations/ best practices. In your case it completely depends on number of phones at the branch and also the number of gateways.


REad this guide.


http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_implementation_design_guide_chapter09186a0080447513.html#wp1043960


HTH


PS: please remember to rate helpful replies!

dgahm Fri, 02/10/2006 - 14:24
User Badges:
  • Blue, 1500 points or more

Note that Cisco is transitioning from AF31 to CS3 for signalling. In CCM 4.1 the default is CS3.


The recommended DSCP/PHB marking for voice control signaling traffic has been changed from 26/AF31 to 24/CS3. A marking migration is planned within Cisco to reflect this change, however many products still mark signaling traffic as 26/AF31. Therefore, in the interim, Cisco recommends that both AF31 and CS3 be reserved for call signaling.

Actions

This Discussion