Solved: Memory for the AS5350

vilaro123 · ‎02-13-2006

Hi.

I am planning in using an AS5350 for VoIP. My question is:

Is there any Table that shows the ammount of memory I have to use for 4 or 8 T1s? If not what is the amount recommended for this cases as SDRAM, and system flash?

Thanks in advance

Juan

a-vazquez · ‎02-17-2006

Two sockets hold main memory SDRAM DIMMs. Main memory is used by the CPU to store the operating configuration, routing tables, and queues. The DIMMs can be 128 or 256 MB, and the capacity of the DIMMs in both sockets must match.

For main memory, the total capacity is 512 MB (two, 256 MB DIMMs). One socket holds a shared memory SDRAM DIMM. Shared memory is used to store incoming and outgoing packets. This DIMM can be 64 or 128 MB. For shared memory, the total capacity is 128 MB (one, 128 MB DIMM). This URL should help you:

http://www.cisco.com/en/US/products/hw/univgate/ps505/prod_technical_reference09186a00800a8555.html

View solution in original post

a-vazquez · ‎02-17-2006

Two sockets hold main memory SDRAM DIMMs. Main memory is used by the CPU to store the operating configuration, routing tables, and queues. The DIMMs can be 128 or 256 MB, and the capacity of the DIMMs in both sockets must match.

For main memory, the total capacity is 512 MB (two, 256 MB DIMMs). One socket holds a shared memory SDRAM DIMM. Shared memory is used to store incoming and outgoing packets. This DIMM can be 64 or 128 MB. For shared memory, the total capacity is 128 MB (one, 128 MB DIMM). This URL should help you:

http://www.cisco.com/en/US/products/hw/univgate/ps505/prod_technical_reference09186a00800a8555.html

sales · ‎10-20-2010

MAIN CISCO DRAM MEMORY
Maximum Memory: 128mb
Base Memory: 0mb (Non removable)
Upgrade Sockets: 2 (1 bank of 1)
If upgrading to 128 MB (MEM-128M-AS53=), move jumper J3 from position 2-3 to position 1-2, If two flash modules are installed, they must be of equal size.

CISCO Rx BOOT FLASH MEMORY
Maximum Memory: 16mb
Base Memory: 0mb (Non removable)
Upgrade Sockets: 1

CISCO FLASH MEMORY
Maximum Memory: 32mb
Base Memory: 0mb (Non removable)
Upgrade Sockets: 2 Install Individually

CISCO PACKET MEMORY
Maximum Memory: 16mb
Base Memory: 0mb (Non removable)
Upgrade Sockets: 1

http://simondirect.com/store/index.php?main_page=index&cPath=7_98