×

Warning message

  • Cisco Support Forums is in Read Only mode while the site is being migrated.
  • Cisco Support Forums is in Read Only mode while the site is being migrated.

1721 with WIC-1-ADSL

Unanswered Question
Feb 16th, 2006
User Badges:

Hi to all,


could anyone here previously configured a 1721 w/ wic-1 adsl and it will serve as gateway to client to connect to the internet? do i need to get the PVC # from the ISP? i'ved read some documentations regarding this, but it seems i cant solve the problem.


Please help.


thanks.


mhel

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
pkhatri Thu, 02/16/2006 - 19:25
User Badges:
  • Purple, 4500 points or more

Hi,


You certainly do need to get the VPI/VCI from the provider, otherwise you do not have a way to tell the 1721 which PVC to use..


Hope that helps - pls rate the post if it does.


Paresh

mhel Thu, 02/23/2006 - 18:54
User Badges:

I'll try to contact my provider to check what it is.



thanks

thisisshanky Thu, 02/16/2006 - 19:54
User Badges:
  • Purple, 4500 points or more

mhel,


Most service providers use a particular vpi/vci pair (usually 0/35 or 8/35, some service providers could use a diff. vpi/vci pair). Once you get a VPI/VCI value from service provider, here is a sample config which enables PPPOE on the adsl wic.



vpdn enable

!

vpdn-group pppoe

request-dialin

protocol pppoe


interface ATM0/1/0

no ip address

no atm ilmi-keepalive

bundle-enable

dsl operating-mode auto

!

interface ATM0/1/0.1 point-to-point

pvc 0/35 <--- vpi/vci

pppoe-client dial-pool-number 1

!

!

interface Dialer1

ip address

ip mtu 1492

encapsulation ppp

dialer pool 1

ppp authentication pap callin

ppp pap sent-username password



HTH


Sankar


PS: please remember to rate all posts!

Actions

This Discussion