Out-of-band access to a PIX 501

bschmi · ‎02-17-2006

I have read in the PIX 501 capabilities that it can be accesses via out-of-band through the console. I can't find any configuration documentaion to support that claim. Can anyone point me in the right direction? Any assitance would be appreciated. Thanks in advance!

pkhatri · ‎02-17-2006

Hi,

The following link has information on the use of a console cable to get access to a PIX:

http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_installation_guide_chapter09186a00800dff14_4container_ccmigration_09186a00801e8931.html#1021709

Hope that helps - pls rate the post if it does.

Paresh