TELNET PASSWORD

Unanswered Question
nhabib Thu, 02/23/2006 - 15:10
User Badges:
  • Red, 2250 points or more

It's either or. It is controled by what you specify when configuring login


For example, if you have the following configured:

line vty 0 4

login

then you will have to use the telnet password.


If you have the following configured:

line vty 0 4

login local

then you will have to use username / password to login.

Richard Burts Mon, 02/27/2006 - 01:40
User Badges:
  • Super Silver, 17500 points or more
  • Hall of Fame,

    Founding Member

  • Cisco Designated VIP,

    2017 LAN, WAN

Aksher


If neither of these cases are there the default is to use the telnet password. They only way to use the username and password is to configure login local (or the equivalent configuration using aaa authentication login local).


HTH


Rick

Actions

This Discussion