02-24-2006 09:50 AM - edited 03-03-2019 02:00 AM
Hi
Can someone please explain how to enable RSTP in the switch (Let's say in 2950 switch).
Or do you have RSTP running in now-a-days switches?
Thanks in advance!
Chris.
02-24-2006 12:31 PM
Hi Chris,
The command to enable it is "spanning-tree mode rapid-pvst
This and other config requirements for RSTP are documented here:
http://www.cisco.com/univercd/cc/td/doc/product/lan/cat2950/12122ea5/2950scg/swstp.htm
HTH,
Bobby
09-24-2019 05:27 AM
http://www.cisco.com/univercd/cc/td/doc/product/lan/cat2950/12122ea5/2950scg/swstp.htm
This link no longer works.
03-24-2012 05:22 AM
Cisco switches by default run PVST+ (Per VLAN Spanning Tree+) which is compatible with 802.1d STP. Most newer switches support PVST+, Rapid-PVST+ & MST. With IOS-based switches you can check what version you are running with the command 'show spanning-tree summary':
switch#
To change the STP mode use the global configuration command 'spanning-tree mode XXX':
09-24-2019 10:05 AM
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: